The Dodge Charger was a mid-size automobile produced by Dodge. The 1966-1974 Chargers were based on the Chrysler B platform. The 1975-1978 Chargers were based on the Chrysler Cordoba. In the early sixties many automobile manufacturers were exploring new ideas in the personal luxury and specialty car segments. Chrysler slow to enter the specialty car market and the Dodge Division was selected to enter an untapped market for a bigger model to fit between the "pony car" Ford Mustang and the "personal luxury" Ford Thunderbird. The intention was to use the B-body for a sporty car with fastback look while sharing as much of existing hardware as possible. Burt Bouwkamp, Chief Engineer for Dodge during the 1960s and one of the men behind the Dodge Charger, related his experience during a speech in July 2004.
Lynn Townsend was at odds with the Dodge Dealers and wanted to do something to please them. So in 1965 he asked me to come to his office - for the second time. He noted that one of the Dodge Dealer Council requests was for a Barracuda type vehicle. The overall dealer product recommendation theme was the same - we want what Plymouth has. The specific request for a Mustang type vehicle was not as controversial to Lynn. His direction to me was to give them a specialty car but he said 'for God's sake don't make it a derivative of the Barracuda': i.e. don't make it a Barracuda competitor.
So the 1966 Charger was born.
"We built a Charger 'idea' car which we displayed at auto shows in 1965 to stimulate market interest in the concept. It was the approved design but we told the press and auto show attendees that it was just an "idea" and that we would build it if they liked it. It was pre-ordained that they would like it."
2011 Dodge Charger - First Test
Dodge was not satisfied with the results of the Charger 500. The car was not enough to beat the other aerocars on the NASCAR circuit. After months of research and development, including the aftermarket shop Creative Industries Inc., the Dodge Charger Daytona was introduced on April 13, 1969. Within hours of its unveiling, Dodge had received over 1,000 orders, despite the price point of $3,993.00 MSRP. Chrysler made many attempts at improving the aerodynamics of the 500 by adding noses rumored to be up to 23 in (580 mm) long. The Charger Daytona finally received an 18 in (460 mm) nose. The full size Charger Daytona was tested with an 18 in (460 mm) nose at the Lockheed-Martin Georgia facility. The test was a success and the project was greenlighted. The nose piece was only part of the innovation. The Charger Daytona also received a 23 in (580 mm) tall wing in rear. This wing was bolted through the rear quarter panels and into the rear subframe. The Charger Daytona's wing also helped out in an unintended way, by giving the car directional stability as well. The Charger Daytona engineering model was tested on the Chelsea, Michigan Chrysler Proving Grounds on July 20, 1969. Driven by Charlie Glotzbach and Buddy Baker, it was clocked at 205 mph (330 km/h) with a small 4-bbl. carb. The Charger Daytona's nose made 1,200 pounds of downforce and the wing made 600 pounds of downforce. (a zero lift car) The Dodge styling department wanted to make changes to the Charger Daytona as soon as they saw it, but was told by Bob McCurry to back off; he wanted function over finesse. The Charger Daytona introduced to the public had a fiberglass nose without real headlamps and a wing without streamlined fairings. The media and public loved the car, but were mystified by the reverse scoops on the front fenders. The PR representatives claimed it was for tire clearance. Actually, they reduced drag 3%. The Charger Daytona came standard with the 440 Magnum Engine with 375 hp (280 kW) and 480 lb·ft (650 N·m) of torque, A727 Torqueflite Automatic Transmission, and a 3.23 489 Case 8 3/4 Chrysler Differential. The Charger Daytona also came with the 426 Hemi with 425 hp (317 kW) and 490 lb·ft (660 N·m) (620 hp (460 kW) at 6000 rpm and 620 lb·ft (840 N·m) at 4700 rpm) for an extra $648.20. The 426 Hemi was also available with the no cost option of the A833 4-Speed Manual. Only 503 Charger Daytonas were built, 433 were 440 Magnum 139 4-Speed and 294 Torqueflite; 70 were 426 Hemi power, 22 4-Speed and 48 Torqueflite. In the end, the Daytona was brought down by the decision to make the 1970 Plymouth Superbird the only 1970 aerocar, however apparently two Charger Daytonas were built using 1970 sheet metal. While Daytonas were raced through the 1970 season, only one Daytona still raced until 1971 (in the 1971 Daytona 500) when NASCAR decreed that engine displacement of wing cars would be limited to 305 ci. That particular car, driven by Dick Brooks finished in seventh place.
In 1971, the all-new third generation Charger debuted. It was completely restyled with a new split grille and more rounded "fuselage" bodystyle. The interiors now looked more like those of the E-body and were now shared by the Plymouth B-body. Hidden headlights were no longer standard, they were now optional. A rear spoiler and a "Ramcharger" hood made the option lists for the first time. A special scoop was mounted in the hood, directly above the air cleaner. If the driver wanted to draw clean air directly into the carburetor, he flipped the vacuum switch under the dash and the scoop popped up. The Plymouth Road Runner used this device and called it the "Air Grabber" hood . This device had been used on the Coronet R/T and Super Bees, but this was the first time it was used on the Charger. Dodge also merged its Coronet and Charger lines. From 1971, all four-door B-bodies were badged as Coronets and all two-door B-bodies as Chargers. This change would add the one-year-only Charger Super Bee to the Charger stable. From 1971–1974, Charger models used the Coronet's VIN prefix of "W". Beginning in 1975, the Dodge Charger was based on the Chrysler Cordoba. The Charger SE (Special Edition) was the only model offered. It came with a wide variety engines from the 318 cu in (5.2 L) "LA" series small block V8 to the 400 cu in (6.6 L) big block V8. The standard engine was the 360 cu in (5.9 L) small block. Sales in 1975 amounted to 30,812. Because of the extreme squareness of the bodystyle, NASCAR teams were forced to rely on the previous years (1974) sheetmetal for race-spec cars. In order for Dodge to be represented, NASCAR allowed the 1974 sheetmetal to be used until January 1978, when the new Dodge Magnum was ready for race use. In 1976 a Dodge Charger was one of two NASCAR stock cars to compete in the 24hrs at LeMans, having been modified with head-lamps, tail-lamps and windshield wipers. It was driven by Herschel and Doug McGriff and sponsored by Olympia Beer, earning the nickname "Oly Express". In 1976, the model range was expanded to four models; base, Charger Sport, Charger SE and the Charger Daytona. The base and Sport models used a different body than the SE and Daytona, and were essentially a rebadging of what had been the 1975 Dodge Coronet 2-door models — and available with a 225 cu in (3.7 L) Slant Six, which was not offered on the SE and Daytona. The Charger Daytona was introduced as an appearance package with either the 360 or 400 engine. Sales increased slightly to 65,900 units in 1976. In 1977, the base Charger and Charger Sport were dropped as this body style became part of the newly named B-body Monaco line, and only the Charger SE and Charger Daytona were offered. Sales dropped to 36,204. In 1978, only about 2,800 Chargers were produced, after which it was replaced by the similar 1978 Dodge Magnum.
The Dodge Dakota is a mid-size pickup truck from Chrysler's Ram division. From its introduction through 2009, it was marketed by Dodge. The first Dakota was introduced in 1986 as a 1987 model alongside the redesigned Dodge Ram 50. The Dakota was nominated for the North American Truck of the Year award for 2000. The Dakota has always been sized above the compact Ford Ranger and Chevrolet S-10 but below the full-sized pickups such as Dodge's own Ram. It is a conventional design with body-on-frame construction and a leaf spring/live axle rear end. The Dakota was the first small pickup with an optional V8 engine. One notable feature was the Dakota's rack and pinion steering, a first in work trucks. On November 4, 2009, Fiat announced that the slow selling truck would be discontinued in 2011. Dakotas have been used by police and fire departments, as off-road vehicles, patrol cars, or even brush trucks. The Dodge Dakota was conceived by Chrysler management as the first "mid-sized" pickup combining the nimble handling and fuel economy of a compact pickup with cargo handling capacity approaching that of full-sized pickups. To keep investment low, many components were shared with existing Chrysler products and the manufacturing plant was shared with the full-sized Dodge D-Model. The name Dakota means "friend" or "ally" in the Sioux Indian language.The first generation of the Dakota was produced from 1987 through 1996. Straight-4 and V6 engines were offered along with either a 5-speed manual or 4-speed automatic transmission. Four wheel drive was available only with the V6. Both 2 m and 2.4 m beds were offered. Fuel injection was added to the 3.9 L V6 for 1988 but the output remained the same.
Strong Dodge Dakota
New 2011 Dodge Dakota Doors Concept
The second-generation Dakota was built from 1997 through 2004. It inherited the semi truck look of the larger Ram but remained largely the same underneath. 1998 saw the introduction of the R/T model with the big 5.9 L 250 hp (186 kW) Magnum V8. At the time of its introduction, it was seen as one of the most radical in its class, not only for its styling, but for the fact it remained the only truck in its class with an available V8 engine that rivalled many V8s found in full size trucks with payloads of up to 1500 pounds. Four-door "Quad-Cab" models were added for 2000 with a slightly shorter bed, 63.1 in (160.2 cm), but riding on the Club Cab's 130.9 in (332.5 cm) wheelbase. The aging 5.2 L Magnum V8 was replaced by a new high-tech 4.7 L SOHC PowerTech V8. The Quad-Cab featured a full-size flip up rear seat to provide room for 3 passengers in the back or lots of dry, interior room for cargo. In spring 1998, a new limited edition R/T package was available as an option on the Dakota Sport model. This version is considered a true street/sport truck, only available in RWD. Factory modifications such as a 250 hp 360 cid/5.9 liter V8, heavy duty 46RE 4 speed automatic transmission, performance axle, limited slip differential, sport suspension and steering, uprated brakes, performance exhaust, special cast aluminum wheels, monotone paint, bucket seats, and many other standard options came with the package. Chrome wheels were available on 2002 models. Some of the last models made in 2003 came with the new stampede lower body cladding package and chromed version of the original cast aluminum wheels at no extra charge. This version of the R/T Dakota was produced through 2003, with the newer 2003 R/T trucks designated as their own trimline and no longer as part of an option package on the Dakota Sport trim.
Exotic Dodge Dakota
Dodge Dakota Dashboard View
The redesigned 2005 Dakota still shared its platform with the new Dodge Durango SUV (which is now similar to the Ram platform). This model is 3.7 in (94 mm) longer and 2.7 in (69 mm) wider, and features a new front and rear suspension, and rack-and-pinion steering. This new generation model also reverted the wheels back to five lug wheels from the prior generation's six lug wheels due to cost and assembly time saving measures. The Dakota is built at the Warren Truck Assembly plant in Warren, Michigan. There were a V6 and two V8 engines available: The standard engine is a 3.7 L PowerTech V6; the two 4.7 L V8 engines are the standard PowerTech V8 and the V8 High Output or HO. The 3.7 L V6 produces 210 horsepower (160 kW) and 235 lb·ft (319 N·m) of torque. The standard output 4.7 L V8 produces 230 hp (170 kW) and 295 lb·ft (400 N·m) of torque. The High Output 4.7 L V8 produces 260 horsepower (190 kW) and 310 lb·ft (420 N·m) of torque. Both the 3.7 L and standard output 4.7 L V8s were available with the 6 speed manual transmission in 2005 and 2006. For 2007, that option was deleted on the V8 models. The facelifted third generation Dakota was unveiled at the 2007 Chicago Auto Show. The Dakota received another facelift and interior upgrade along with a few other upgrades including built-in cargo-box utility rails, heated bench seats, best-in-class towing (up to 7,050 pounds), the largest and longest standard bed in the class, and the largest mid-size truck cab. Its new 4.7 liter V8 produces 302 hp (225 kW) and 329 lb·ft (446 N·m) of torque. The standard engine remains the 3.7 liter V6 with 210 horsepower (160 kW) and 235 lb·ft (319 N·m). of torque. Production began in August 2007. On November 4, 2009, Fiat announced that the Dakota will be discontinued in 2011. A new unibody truck called the Ram Rampage is expected to take the place of the Dakota in 2012.
.jpg)
