Ferrari 599 GTB Fiorano Hybrid

Motor Authority reported that Ferrari president Luca Cordero di Montezemolo was working on the development of a Ferrari that will use alternative energy sources and which will be based on what Ferrari is doing in Formula 1, which uses Kinetic Energy Recovery System. The KERS was tested using a prototype 599.Ferrari 599 GTB FioranoFerrari 599 GTB FioranoFerrari 599 GTB FioranoFerrari 599 GTB

Arouse The Emotional Bond Between Car and Motorsport Enthusiasts

Supercar Imola - Ferrari Sports Car Concept by John Mark Vicente

 Supercar Imola Ferrari Sports Cars Concept by John Mark Vicente

The another design by John Mark Vicente: the Ferrari Imola, after the sublime Bugatti Renaissance concept. According to the author, his Ferrari concept car is inspired by the Ferrari F70 created by Randy Rodriguez and the Dino Competizione by Sacha Selipanov.

This time, an Italian one that could give plenty of ideas to the designers at Ferrari. Imola is a spider without windscreen and has a future hybrid Ferrari V6 engine. The designer used triangular and trapezoidal shapes to create the head and tail lights and the grille.

The enormous rims and semi-slick tires underline the aggressiveness of the vehicle. This supercar is ready to take on the road monsters like Ariel Atom, Caparo T1, KTM X-Bow and especially the Lotus Elise.

 Supercar Imola Ferrari Sports Car Concept by John Mark Vicente

2010 Ferrari Sports Cars 612 GTO Concept Cars

 2010 Ferrari Sports Cars 612 GTO Concept Cars

Sasha calls himself 'the angry car designer' for some reason, and has no time for fools. A pure conceptual study for a top-end Ferrari, possibly a future generation of the 612 Scaglietti, Selipanov design proposal appears to borrow bits and pieces from certain supercars like the Aston Martin One-77 as well as Maranello’s own 458 Italia.

The Ferrari 612 GTO concept is the work of Sasha Selipanov, an extremely talented, and also incredibly irate, automotive designer based in Berlin, Germany.

The 612 GTO concept is a proposal for the next generation 612 Scaglietti, but with a high-performance GTO twist and completely revised aesthetics. Sasha calls himself 'the angry car designer' for some reason, and has no time for fools.

For the 612 GTO concept Sasha has used influences from the classic Ferrari 250 GTO - which is evident in the triple air intakes molded into the hood.

2010 Ferrari Sports Cars 612 GTO Concept Cars

2011 Ferrari Sports Cars 458 Challenge 4497 cc V8 Engine

 

 2011 Ferrari Sports Cars 458 Challenge 

Coming just a few months after the 2010 Frankfurt Motor Show unveiling of the Ferrari 458 Italia on which it is based, the Ferrari 458 Challenge introduces a number of important modifications to adapt it for competition use. Ferrari 458 was presented the 2010 Frankfurt Motor Show. Lately, the Ferrari 458 Challenge has made its world premiere debut in Maranello during the Annual Dealer Meeting.
With the new 458 Challenge, Ferrari is offering its sportier clients - professional and gentlemen drivers alike - a car that is extremely responsive, with great performance and superb handling. This mid-rear V8-engined berlinetta will allow Ferrari Challenge participants to enjoy to the full the exhilarating cut and thrust of the race weekends on the world's leading circuits, as well as the passion that has always been an integral part of Ferrari's one-make championship.
The Ferrari 458 Challenge introduces a number of important modifications to adapt it for competition use. This car use the direct injection 4497 cc V8 remains strictly in production tune, with an output of 570 hp at 9,000 rpm. That said, modifications have been made to the gear ratios and calibration of its dual-clutch F1 gearbox to assure gamier torque at bluer revs. The Ferrari 458 dispute are as well equipt with the E-Diff electronic differential already employed on the road-going adaptation, a 1st for Ferrari’s track-only automobiles.

 2011 Ferrari Sports Cars 458 Challenge

For a Ferrari Challenge model is the adoption of the F1-Trac traction control system, the most sophisticated of its kind. The F1-Trac system constantly monitors levels of grip for maximum high-performance road-holding. Two specific track-biased calibrations – wet and dry – have been developed for this application.
Important work has also come in abbreviating the auto angle. This centered both the exterior and interior with Ferrari’s engineers boiling down particularly about abbreviating the thickness of the bodyshell panels and on using lightweight cloths, such carbon-fibre and Lexan.

2010 Ferrari Sports Cars 458 Italia Tuning by Oakley Design

PRESS RELEASE Following international acclaim for their finely honed Porsche GT2, GT3 and Panamera conversions, Oakley Design is now proud to announce their tuning programme for the Ferrari 458 Italia. Production will be limited to just 5 cars, each bearing a unique build number plaque. Outside of this Limited Edition model, individual parts will also be made available for clients who do not require the complete package. With Jon Oakley’s motorsport background central to the company’s philosophy, any change, whether aerodynamic or mechanical, is only done for sound technical reasons.

2010 Ferrari Sports Cars 458 Italia

2010 Ferrari Sports Cars 458 Italia Tuning by Oakley Design production will be limited to just 5 cars, each bearing a unique build number plaque. Outside of this Limited Edition mode, individual parts will also be made available for clients who do not require the complete package. 

With Jon Oakley motorsport background central to the company philosophy, any change whether aerodynamics or mechanical is only done for sound technical reasons.

Known for its customization programme for the Porsche 997 GT2, Oakley Design revealed today its tuning kit for the latest Ferrari 458 Italia. Because the car is quite perfect the tuning company decided to install a carbon-fiber front spoiler which adds 45kg of downforce over the front axle at 150mph (240km/h) but also a racecar style centrally positioned radiator vent designed to channel air out over the bonnet instead of under the car. And this is not all, as the tuning company installed new air exit ducts beside the headlamps.

Finally, a new rear spoiler with Gurney flap adds 25 kg of downforce over the rear axle at 150mph. This works together with the underbody diffuser to reduce the Italia overall drag by smoothing out the separating airflow. The only exterior alterations made for cosmetic reasons are the signature Oakley Design carbon fibre roof panel, mirror covers and engine cover insert below the rear window glass. These are matched in the engine bay by carbon-fibre panels covering the inner wings and rear bulkhead.

In order to optimize the sound of the engine, the car features a complete titanium exhaust system with triple outlet pipes and no bypass valve shaves a huge 30kg from the Italia’s aft section.

The design is completed by the 20-inch Oakley Design lightweight composite wheels which save a significant 8.0kg of unsprung weight per corner. For those who don’t know the standard 458 Italia comes with 570bhp and 540 Nm of torque but with some ECU tweaking the car delivers now 627bhp and 567 Nm of torque. With these numbers, the car ca sprint from 0 to 100 km/h in just 3.0 seconds (standard version can sprin in 3.4 seconds) and has a top speed of over 330 km/h. We have bad news though: the production of this customization programme will be limited to just 5 cars, each bearing a unique build number plaque.

2010 Ferrari Sports Cars 599 Fiorano HY-KERS Hybrid Concept

Geneva, 2 March 2010. Ferrari presents a vettura laboratorio (experimental vehicle) at the 80th edition of the Geneva Motor Show based on the 599 GTB Fiorano equipped with an advanced new hybrid transmission.

2010 Ferrari Sports Cars 599 Fiorano HY-KERS Hybrid Concept

Ferrari made it official today and unveiled the hybrid Hy-Kers we gave you a sneak peek of, and for those of you who think the guys in Maranello are going soft by going green(er), this car is a real Ferrari that could be in showrooms soon.

Maranello promises the Hy-Kers hybrid concept will offer stellar performance along with improved fuel economy and emissions. It makes that point clear in calling Hy-Kers “an example of how Ferrari is approaching the development of hybrid technology without losing sight of the performance traits and driving involvement that have always exemplified its cars.”

The HY-KERS displayed at the Geneva Motor Show is an example of how Ferrari is studying the application of hybrid technology to high-performance sports cars. Central to Ferrari's objectives is maintaining the balance, handling and performance characteristics typical of its cars despite the inevitable disadvantages in terms of weight represented by applying hybrid solutions to existing models.

To this end Ferrari has employed its racing experience to adapt a lightweight hybrid drivetrain to the 599 GTB Fiorano with the aim of ensuring that vehicle dynamics are unaffected. This was achieved by the careful integration of all system components, positioning them below the centre of gravity and ensuring that interior and luggage space are entirely unaffected. Similarly the flat lithium-ion batteries are positioned below the floorpan of the car inside the aerodynamic underbody. The result is a centre of gravity that is even lower than in the standard car. In addition, a part of the weight gained by fitting the electric motor, generator and the batteries is offset by being able to do away with the traditional starter motor and battery.

Ferrari stepped into the limelight once again this year at the 2010 Geneva Motor Show where they debuted their vettura laboratorio, the Ferrari 599 HY-KERS hybrid concept sports car. Known for their screaming V-12 exotic sports cars, Ferrari is for the first time experimenting with the inevitable future of electrification. The HY-KERS is based on the 599 GTB Fiorano, which is one of the best torque producing vehicles Ferrari has to offer, now amplified with the hybrid-electric motor rated at an astonishing 107 hp and 111 lb-ft of torque.

When it comes to center of gravity (CoG), lower is better. It is a concern in any car, but this concept is essential in a sporting car. By using clever packaging, the CoG of the HY-KERS is actually lower than a traditional 599. This clever packaging also keeps the hybrid equipment from infringing on any interior space.

As with most hybrids, the HY-KERS can run in full electric mode based on engine load and other factors. Unlike lesser hybrids, the HY-KERS does not feature a Continuously Variable Transmission. The electric motor mounts to the rear of a seven-speed dual clutch F1 transmission. Weighing about 88 pounds, the electric motor produces about 100hp to aid the not-anemic V-12. Hybrid battery charging is provided by using a Kinetic Energy Recovery System built on the experiences from last years Formula1 program.

The new hybrid system incorporates pioneering engineering principles into every detail of the vehicle. The flat lithium-ion batteries are located on the floor pan of the car resulting in a lower center of gravity. The compact electric motor of the HY-KERS is coupled with a dual-clutch 7-speed transmission. Ferrari’s goal was to offset every kilogram increase in weight by a gain of at least one hp from the electric motor.

The vehicle incorporates a similarly designed system to that of Ferrari's Kinetic Energy Recovery System (KERS) from last year's Formula One program. Under braking the electric drive unit acts as a generator, using the kinetic energy from the negative torque generated to recharge the batteries. This phase is controlled by a dedicated electronics module which was developed applying experience gained in F1 and, as well as managing the power supply and recharging the batteries, the module also powers the engine's ancillaries (power steering, power-assisted brakes, air conditioning, on-board systems) via a generator mounted on the V12 engine when running 100 per cent under electric drive. It also incorporates the hybrid system's cooling pump. Ferrari has also applied this F1 technology to help optimize the dynamics of the car, enhance traction and improve overall braking balance of the HY-KERS.

Ferrari hasn’t gone too far out of its league. The 599 HY-KERS will still integrate with the original V-12 hyper-revving engine allowing the driver to snap the throttle open and be tossed back against the seat faster than the original model. Ferrari claims the hybrid stallion can achieve 124 mph in 7.5 seconds, 0.4 seconds faster than the current 599. The seeds have been sown in Ferrari’s debut of green technology.

Ferrari hopes to have Hy-Kers technology in showrooms within three to five years. The system can be adapted to front- or mid-engine vehicles, according to Automobile, and the first production car to use it will be available only as a hybrid. According to the Daily Mail, Ferrari says the technology could double the cost of the 599, but Maranello hopes to bring those costs under control as it ramps up production.

2010 Novitec Rosso Super Sports Cars Edizione 747 Bi-Compressor Engine

The Ferrari 430 Scuderia is already one of the hottest-performing supercars on the market, but some people just don't know how to leave well enough alone. Some of those people work at Ferrari, who've worked tirelessly on the 458 Italia to supplant the 430's already legendary performance. And some of those people work for Novitec Rosso, who've come back yet again with another mod job for the Italian stallion.

2010 Novitec Rosso Super Sports Cars Edizione 747 Bi-Compressor Engine

It takes its name from its rated power output of 747 horsepower: To mark the farewell of the Ferrari 430 Scuderia, NOVITEC ROSSO presents the Edizione 747. The world’s leading tuner of the super cars from Maranello turns the lightweight model into one of the most powerful super sports cars of our time. And with its matte yellow and grey paintjob it is also one of the most spectacular-looking cars of our time.

Called the Edizione 747, the custom Scuderia may not be as big as a jumbo jet, but it packs nearly as much thrust. Strapping a pair of superchargers to that high-revving 4.3-liter V8, along with a few more tweaks here and there, brings output up from an impressive 510 horses to a bonkers 747 horsepower. Intercoolers and revised aerodynamic cooling keep the engine running cool. 

Twenty-inch NF3 rims wear Michelin Pilot Sport Cup rubber mounted to sport springs that drop the ride height by a further 30 milimeters, available with an adjustable front end that can lift 40 mm to clear curbs and speed bumps at the touch of a button. Novitec's also decked out this particular example with a two-tone yellow and matte black paint scheme, and given the interior a few mods to complete the package.

At the heart of this special model lies the 2010 new NOVITEC ROSSO 747 Bi-Compressor engine that boosts power output of the V8 that normally produces 510 hp / 375 kW by 237 hp / 174 kW. Driving performance improves accordingly: With a sprint time for 0 – 100 km/h of less than 3.4 seconds, 9.4 seconds to 200 km/h and just 22.9 seconds to 300 km/h the NOVITEC ROSSO model is the most powerful and quickest Scuderia in the world. Just as impressive is the top speed of 351 km/h.

The Edizione 747 specification is the ultimate high-end version and is limited exclusively to the Berlinetta model of the Ferrari 430 Scuderia. The layout of the engine conversion corresponds to all NOVITEC ROSSO Bi-Compressor conversions for the mid-engine sports car. Each cylinder bank is fitted with an intercooler and a cogged-belt-driven high-performance supercharger with a maximum boost pressure increased for this version to 0.53 bar. 

The intercooling system features its own dedicated water circuit. The radiator of the system is located behind a special centrally placed air duct in the front apron. To guarantee perfect durability even under high ambient temperatures the conversion also includes more effective radiators for water and oil.

The result of this labor is a unique symbiosis of superior power and excellent running smoothness. With a rated power output of 747 hp / 549 kW at 8,500 rpm the NOVITEC ROSSO Edizione 747 Bi-Compressor engine surpasses its naturally aspirated brethren by 237 hp / 174 kW. The increase in torque from standard 470 Nm to 738 Nm at 6,300 rpm represents an enormous plus in low-speed power.

As a tribute to the outgoing Ferrari 430 Scuderia, Novitec Rosso has unveiled its new Edizione 747. As the name suggests, the V8 engine has been upgraded with a bi-compressor to produce a total of 747-hp with a maximum torque of 544 lb-ft. 0-62 mph comes in just 3.4 seconds while 0-124 mph takes 9.4 seconds. To speed comes in at 218 mph. Novitec also threw in a new intercooling system that features its own dedicated water circuit and is given a maximum boost pressure figure of 0.53 bar.

To lend the Scuderia better suitability for everyday use despite the lowering NOVITEC ROSSO offers an innovative hydraulic lift system for the front axle. At the push of a button in the cockpit the front is raised by 40 millimeters. It allows drivers to safely navigate parking ramps, low curbs and speed bumps. 

After safely passing over the obstacle, another push of the button reverts the suspension to its original position. If the button is not pushed the front end reverts to its original position automatically once the car reaches a speed of 80 km/h.

2010 NOVITEC ROSSO Sports Car Refines the Ferrari California

Novitec Rosso has released their sporty styling and performance package for the new Ferrari California. The 2010 Novitec Rosso Ferrari California comes with a custom-tailored tire/wheel combination with diameters of 21 and 22 inches, suspension modifications, more power and exclusive interior options.

2010 NOVITEC ROSSO Refines the Ferrari California

The Ferrari California 4.3-liter V8 engine power increases by 40 hp / 29.4 kW to 500 hp / 368 kW. Simultaneously peak torque grows from 485 to 518 Nm at 5,300 rpm : 2010 NOVITEC ROSSO now also refines the new Ferrari California.

Tasteful refinements with aerodynamic benefits characterize the NOVITEC ROSSO design program for the sports car from Maranello. All aerodynamic-enhancement components are made from especially lightweight yet high-strength clear-coated carbon fiber. The NOVITEC ROSSO front spoiler attaches to the production bumper and lends the sports car an even more striking face. Its sophisticated shape further reduces lift on the front axle for even better directional stability at high speeds.

To reduce lift on the rear axle and thus achieve an optimal aerodynamic balance NOVITEC ROSSO equips the California with a newly designed diffuser for the rear apron and a spoiler lip on the trunk lid.

Three-piece NOVITEC ROSSO NF3 wheels also play a major role in the even more stunning appearance of the refined Ferrari. By choosing a staggered combination of size 9Jx21 wheels in front and size 11.5Jx22 on the rear axle NOVITEC ROSSO further emphasizes the wedge shape of the car.

Technology partner Pirelli supplies high-performance tires custom-tailored to this Ferrari. Aerodynamic and styling changes include new rocker panels with integrated airfoils and black side markers, a rear diffuser, rear spoiler lip and carbon fibre rear molding. Wheels are 9Jx21 size in front and 11.5Jx22 at the rear, shod with 255/30 ZR 21 and 315/25 ZR 22 Pirelli tyres respectively.

NOVITEC ROSSO sport springs are custom-calibrated to match these ultra-low-profile tires, and lower the ride height by some 35 millimeters. At the same time the NOVITEC ROSSO specialists have developed an additional feature to further improve the everyday utility of the Ferrari California.

The NOVITEC ROSSO hydraulic front lift system raises the front of the car by some 40 millimeters at the push of a button in the interior. That allows drivers to safely navigate parking garage ramps or speed bumps. At a second push of the button or automatically when reaching a speed of 80 km/h the front reverts to its original position.

This injection of extra power comprises on the one hand a newly calibrated engine management system with custom mapping for injection and ignition, including a new higher redline speed of 8,300 rpm. The tuning package also includes the NOVITEC ROSSO stainless-steel high-performance exhaust system with metal catalysts and a flap actuator operated from the Manettino switch on the steering wheel.

NOVITEC ROSSO fulfills customer demands for interior customization with perfectly finished leather and Alcantara interiors. The choice of available colors and meticulously sewn upholstery designs is virtually unlimited.