Concept Car : The Helios Lizard

Kim Gu-Han of Universitat Dulsburg-Essen, Germany, wants to build a solar-powered car that can charge itself entirely from the sun. The problem is the limited space for photovoltaic panels on a car’s roof. The Helios overcomes that limitation by acting like a frill-neck lizard. When stationary, the off-road vehicle can unfurl a large set of photovoltaic cells to produce enough energy to run the car, with excess energy for home power. The Helios won Best Use of Technology category at the Interior Motives Design Awards 2008.

Concept Car : Eco Transportation Phoenix

Future transportation concepts give the world hopes to deliver eco-friendly vehicles that will be far better both in technology and looks. However, all this exists conceptually and we are still not near any such technology that could provide high-speed sporty vehicles with zero emission electric engines. Phoenix is another such conceptual design for American urban life. This machine is in itself a try to blend freedom, strength, and flexibility, with a special concern to our gradually deteriorating environment. Design seems to be inspired from American muscle cars and pick-up trucks. This two-seater car derives power from Flexi-Fuel V8 engine. Not only engine but the bio-composite material and recycled aluminum used in body are other important aspects that make it soft toward the environment.

The tough and agile design incorporates a safety cell made from reinforced bio-polymers with roll-bars behind each seat to provide additional protection. An Orbital Omni-directional four-wheel-drive system makes it capable of rotating around its own axis and sideways. All this sounds fantastic and do go with its name that is inspired by an ancient mythical bird, except that it can’t fly.

Concept Car : MOY

The contest winner, MOY concept car was designed by Elvis Tomljenovic received first price in contest held during auto(r) automotive design conference in Zagreb, Croatia. Elvis Tomljenovic is student of the Zagreb School of Design. Elvis Tomljenovic is finishing student of the Zagreb School of Design. He is currently looking for sponsors/scholarships to continue education in field of automotive design at postgraduate level.

MOY concept is made for generation who uses technology as a means to express themselves and communicate with others. The idea behind MOY concept is that everyone can design their own car on their own computer and then apply the design to the vehicle using wireless data transfer or share it with other people through web-site, forum, e-mail etc. To those who lack the necessary skills or time to create their own design, we offer the option of downloading ready made designs. The vehicles are interconnected, so the change is possible in motion. Movement recognition technology enables us to draw on the car in real time.

Since MOY can display both static images and videos, it can be used as a new medium of promotion. Vehicle is powered by batteries that charge electro motors set in wheels and controlled by drive-by-wire technology. The body of the car is made of outer and inner polycarbonate layers, with layers of liquid crystals, LED diodes and electro chromic foil (film) in between.

auto(r) is the biggest automotive design conference in Europe in 2009 and the first ever held in South East Europe (SEE). The conference theme: “Professional automotive designers from SEE”, born or originated. This is the first time ever that this subject has been taken to the public. A title auto(r) has been chosen because it combines two words - automobile and author. Our mission is to present designers as authors of automobile designs.

Concept Car : HONDA S2000 OSM HYBRID TECHNOLOGY

Honda is doing a straight 180 on the next S2000, judging by the concept car revealed at the BIMS today. The Honda S2000, a dynamic marvel with that screaming 2.0-litre engine and excellent short-throw 6-speed gearbox, has been due for a new model for some time now, as rivals keep bettering their offerings. The concept uses Honda’s hybrid technology, although our feeling is this would not be the engine of choice when the street car debuts.



Featuring integrated rear lights, a flowing bodyline and a shape clearly related to the Civic hatch, the S2000 concept seems to have been shortened and its stance widened. There seems to be a lot of flow in the lines, giving the car cleaner, more seamless looks. Interior again, is a Civic relative of some note, peppered with blue background lighting, digital speed readout and utility buttons. And the concept is no longer a roadster; we see space for two baby hobbits at the back. No sign of where the roof goes though, and none of whether said roof is made of canvass or tin either.



Honda says that the OSM roadster on display at the 2008 British Motor Show is merely a design study, but given that “design study” is frequently a euphemism for “future design language,” we wonder if we’re seeing the next iteration of Honda car styling. Frankly, we hope so, because this is worlds better than what we’ve seen from the automaker of late, from the Accord right on up to the bland and bloated Pilot. The OSM, short for Open Study Model, is a shapely two-seat convertible that we’d be happy to drive today. Well, maybe with headlamps that weren’t lightsaber-sized. Other than that, we love the jaunty look, especially in back, where the taillamps sweep gently from one side of the car to the other. Since it’s a styling exercise, there’s no specific powertrain combination associated with it, but Honda assures us that the car is an indication that lightweight, low-emissions motoring needn’t be boring.



No kidding, guys. Inside, the cockpit basically evolves the two-tier instrument panel you’ll find in the current Civic into a far more attractive driving environment that we hope to see in road cars sooner than later. While Honda says there’s no plan to create a production sport/econo roadster like this anytime soon, somebody’s obviously thinking about it. Future S2000 replacement, maybe? “Design studies” such as this don’t happen by accident.

Concept Car : Ford iosis MAX

Ford iosis MAX concept is a Multi Activity Vehicle (MAV) which has been premiered by Ford in Geneva Auto Show.

Ford iosis MAX concept is based on a fresh interpretation of Ford’s kinetic design form language and expressing the company’s direction for its following C-cars model range.

Ford iosis MAX is powered with a 1.6-litre 180PS four-cylinder petrol engine from the EcoBoost family that features turbocharging and direct injection. With the engine, Ford has found out that the Ford iosis MAX has a 125g/km CO2 emissions level.

Ford iosis MAX comes with a set of new advanced aerodynamics, lightweight materials, and new door opening concepts.


Press Release
Ford will unveil a head-turning concept car at the 2009 Geneva Motor Show, to express the design direction for its next generation of global C-cars.

The Ford iosis MAX features striking exterior and interior treatment based on a fresh interpretation of Ford’s kinetic design form language. It is a dynamic Multi Activity Vehicle (MAV) and showcases new levels of efficiency and flexibility.

Styled by a team led by Martin Smith, Ford of Europe’s executive design director, the car’s dramatic looks and striking pearlescent ‘Limelight’ color are complemented by innovative solutions which enhance its practicality and environmental performance.

Ford iosis MAX showcases new door opening concepts, lightweight materials, advanced aerodynamics, and a preview of the European development of Ford’s global EcoBoost petrol engine technology coming in 2010.


Coupled to this clean and lean engine are the recently introduced and acclaimed Ford PowerShift transmission, plus a new Ford Auto-Start-Stop system also due for production in 2010.

“The Ford iosis MAX marks the next stage in the evolution of kinetic design, and showcases a number of affordable engine technologies that will make a difference to the environment and our customers’ pockets,” says Martin Smith, Ford of Europe’s Executive Design Director.

“Our designers have stretched themselves beyond the two previous iosis concepts, and have applied kinetic design form language to a MAV,” adds Smith. “The Ford iosis MAX proves that cars in the compact MAV class can have emotive, dynamic styling without sacrificing their traditional virtues of practicality or efficiency – something that the larger and revolutionary S-MAX has already demonstrated.”

“Although the iosis MAX isn’t a forerunner to a specific production vehicle, it clearly highlights how kinetic design is evolving and can be applied with stunning results to all vehicles in the Ford portfolio.”

Ford iosis MAX Concept - Exciting, dynamic design

The design team sought to create a strong impression of lightness and efficiency. This was achieved through the concept’s sleek, coupe-like side profile, which provides a clear contrast to the more boxy approach adopted by many vehicles in the compact MAV segment.

The feeling of lightness is reinforced by the extensive use of glass in the vehicle, with the steeply raked front screen flowing back in one piece to the tailgate, revealing the skeletal roof structure underneath.

The front of the Ford iosis MAX is dominated by the bold trapezoidal lower grille, which is now a key part of the Ford brand identity. For the first time, however, the grille features a distinctive new treatment with three horizontal chrome-rimmed bars, giving the vehicle’s face a more dynamic and imposing feel. The C-pillars, with their highly original ‘flying buttress’ design, also deliver significant functional benefits. The pillars act as spoilers, channelling airflow as close as possible to the tailgate glass for optimum aerodynamic efficiency.

The pillars work in combination with the dramatic looking aerodynamic spoiler which is centrally mounted at the rear of the roof structure, with its wings cantilevered above the tailgate glass.

Imaginative details catch the eye all around the vehicle, including the striking new graphics for the front and rear lamps, stylish LED lighting strips in the rocker panels, and stunning 19-inch alloy wheels with a lightweight two-piece construction.


Ford iosis MAX Concept - Dramatic interior environment

The iosis MAX interior presents a bold evolution of the kinetic design language used on the exterior, incorporating dynamic shapes and advanced materials to create an interior environment which is light, spacious and expressive

A key part of the Ford iosis MAX interior concept is the spine-like bridge which runs the full length of the interior from the bulkhead through to the rear load area.

The bridge supports the center console, and provides a mounting point for the four individual seats and central armrests. The seats are cantilevered from the bridge, allowing for an uninterrupted floor space and giving occupants the sensation that they are ‘floating on air’.

The colors selected for the interior were chosen to complement the striking ‘Limelight’ of the exterior. Different tones of luminous natural greys feature on most interior surfaces. Small details are picked out in a bright acidic yellow to add visual impact and stress the dynamic, sculptural character of the shapes and graphics

The innovative use of shapes and materials is also reflected in the center console, which has a smooth plexiglass surface that rolls down from the instrument panel like a ribbon and flows through to the rear of the passenger compartment.

The whole of the console surface acts as a touch-screen display to control the vehicle’s systems. Information – such as sat-nav instructions or details of an incoming phone call – is displayed on the console when required using projectors mounted beneath the surface.


A rotary control at the bottom of the console allows the driver to switch between primary functions, while a mouse-like controller in front of the central armrest provides a swift and accurate way to navigate within menus as an alternative to using the touch screens.

The Ford iosis MAX also explores innovative solutions which could provide future MAVs with increased practicality and flexibility.

To help overcome common problems faced by owners when loading or unloading the vehicle in a confined space, such as a congested multi-storey car park, the concept features a unique two piece tailgate design. This allows the tailgate to be fully opened, even when there is restricted space behind or above the vehicle.

To provide even greater loading flexibility the iosis MAX utilises a B-pillarless construction, providing a wide, unobstructed load aperture when both front and rear side doors are open. In combination with the ‘floating’ seat design, this enables awkward, bulky items – such as flat pack furniture – to be slid easily onto the floor of the cabin or the folded seat backs

New opening kinematics are also utilised in the dual-function hood design, which incorporates an active hood system for improved pedestrian protection in combination with greatly enhanced access to the engine compartment.


Ford iosis MAX Concept - Responsive yet environmentally friendly

The innovation featured in the Ford iosis MAX extends to its powertrain, which showcases efficient technologies coming in future Ford vehicles to demonstrate how reduced fuel consumption and CO2 emissions can be achieved without compromising dynamic performance.

Power is provided by a 1.6-litre 180PS four-cylinder petrol engine from Ford’s new EcoBoost engine family. Ford EcoBoost engines feature turbocharging and direct injection technology to deliver fuel economy up to 20 per cent better than conventional petrol engines with a similar power output.

EcoBoost engines will be progressively introduced to Ford’s European product range from early 2010.

The 1.6-litre EcoBoost unit in the iosis MAX is further optimised through the use of a new Ford Auto-Start-Stop system, intelligent alternator and six-speed Ford PowerShift double-clutch automated manual gearbox with ratios tailored to deliver maximum fuel efficiency. Simulations predict that the concept vehicle could achieve CO2 emissions of 125g/km.

“We’re eager to hear reaction to the Ford iosis MAX as the design team has worked hard to incorporate so many interesting ideas, features and materials that could find their way into future Ford vehicles,” says John Fleming, Ford of Europe’s Chairman and CEO. “The car also signals the arrival of an exciting new range of environmentally friendly Ford EcoBoost petrol engines which use the same efficient principles already making an impact on our larger North American models.

“The next 18 months will see some exciting new models with clean and affordable technologies arriving in the Ford of Europe range,” Fleming adds. “When we say ‘Feel the Difference’, our European customers will know we mean it!”

Concept Car : Enigma

British designer Tan Sohanpoll produced three large-scale model of Enigma Concept, which has nothing to do with traditional cars. The two wheels on the same side on the edges of the body, while the third - on the other, but the middle.

Single car allows the pilot to navigate back and forth as accelerating machine. A body at the entrance of the bend is rejected right and left. How the engine is equipped with this miracle of technology is unknown.

Concept Car : Aptera 330mpg

Yeah, you're laughing at this weird-looking half-egg-shaped concept car now, but when gasoline costs $10 a gallon not too long from now, this 330 mile-per-gallon Aptera concept car might start looking pretty damn good. It cops that high-mpg efficiency with a fuel-sipping diesel engine lashed onto hybrid technology, coupled with its wind-slippery aerodynamics and 850-pound weight.
Stare at it long enough, and it starts looking like a lemon that's been cut in half. Will it be a lemon? Wait a couple of years to find out, because the Aptera's designer, Accelerated Composites, says the three-wheeled fuel miser will hit the road by the end of 2008 at a sticker price of less than $20K. – Charlie White

Concept Car : Kia Soul

Concept cars serve a few purposes, they allow designers to run free without practical limitations, while leading to the creation of new technology that eventually finds its way to every day cars.



The EFIJY is one such concept, which although is bold and wins over many fans, would struggle in the showrooms. Nonetheless as a concept car, it has reached the very top.
The modern day expression of the iconic Australian FJ Holden, has just been awarded the United States concept car of the year award.
“This award recognition of that and a further advertisement for the talent and versatility of the designers we have here at GM Holden.” GM Holden’s director of design Tony Stolfo said
The EFIJY was designed by Holden in 2005, and has been touring around the world ever since, it beat over 33 concept and 11 production vehicles for the award.

Unlike some of the current cars in the Holden lineup, the EFIJY is a compromise free, mobster themed monster. Powered by a 480KW V8 engine, the EFIJY is not all just looks.

Holden designer and project leader Richard Ferlazzo has always said, there were no plans to go beyond the concept stage.

Concept Car 2004 : Audi RSQ

The futuristic film car Audi RSQ was presented to the public for the first time on April 7, 2004 at the New York International Automobile Show. Audi tackles its most ambitious product placement project ever: For the epic event motion picture „I, ROBOT“, Audi Design developed the spectacular vehicle, which helps leading actor Will Smith - a homicide detective in the year 2035 - solve a mystery that could have grave consequences for the human race. Fox releases "I, ROBOT“ in the U.S. on July 16; the film arrives in Germany in August.

In the near future, technology and robots are a trusted part of everyday life. In „I, ROBOT“, that trust is broken and one man, alone against the system, sees it coming. The film employs spectacular visual effects innovations beyond any ever put on screen, to bring a world of robots to life. The film is directed by Alex Proyas (Dark City, The Crow) and is set in a world created by famed science fiction writer Isaac Asimov in his short story collection “I, ROBOT“. For the first time ever, Audi developed a car specifically for a major Hollywood motion picture. Audi engineers created a car for „I, ROBOT’s” incredible world of 2035.

The resulting Audi RSQ sport coupe is a visionary interpretation of Audi’s typical design language. The most important thing was that despite its extreme character the car should still be recognized as an Audi. The cinemagoer will therefore see the new Audi front-end with the typical single-frame grille in the movie. The RSQ includes special features suggested by movie director Alex Proyas. The mid-engined sports car operated by the story’s police department, races through the Chicago of the future not on wheels but on spheres. Its two doors are rear-hinged to the C-posts of the body and open according to the butterfly principle. In addition to the RSQ concept car, Audi supplied further volume-production cars which appear - in disguised shapes - in the movie’s traffic scenes. Audi also supplied the interior mock-up used for interior car scenes. With this project Audi opens up a new chapter in product placement. Previously, the brand with the four rings has always supplied volume-production cars to movie productions. In individual cases, such as “Mission: Impossible II,” these cars were even used in movies before their market launch. With „I, ROBOT“ and the systematic development of a “car of the future,” Audi goes far beyond its previous product placement activities.

Audi has been participating as an automobile partner in major movie productions for several years. In addition to John Frankenheimer’s action classic “Ronin” with Jean Reno and Robert de Niro (1998), the brand with the four rings played the automobile lead in "The Insider" (1999) featuring Academy Award Winner Russell Crowe, “Mission Impossible II” (starring Tom Cruise, 2000), “The Mothman Prophecies” (starring Richard Gere, 2002), “About a Boy” (starring Hugh Grant, 2002) and Reese Witherspoon’s “Legally Blond 2“ (2003).

2057 Mercedes-Benz SilverFlow

Leadership luxury cars. Expensive cars of this camp. Makes him unable to stop thinking. Stop developing themselves. Because the other car camp. Are desired position of leadership. Search is committed to thinking in both technology development and technology to the most advanced model.













Last camp Mercedes-Benz. Offers you the latest ideas flowing pattern SilverFlow out that some novel also take the form or influence the car to improve the previous generation. Much of the novel. Material is used. He called it that. micro-metallic materials that can be managed. Shape control of electro-magnetic field with it. (See the movie as it installed a bunch means that when you park the car then. You transmute it. That it dissolves into a store that is enough to use force to drive it back to original shape. With that powerful magnetic field. It can transmute to pamper owners also take into ...! .. Oh do everything this. The only exception. Still do not have right now ... because it is a car of the future.